Konica Minolta bizhub PRESS C8000e - Manual (Page 221)

bizhub PRESS C8000 6-57
6.9 Using Finisher FS-612 6
0 Punch mode is unavailable for paper sizes other than standard (Detect Size Setting, Custom, Tab pa-
per).
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
4
Press [Punch].
The Punch Screen will be displayed.
5
Press the desired key to select the punch type and position.
6
Press [OK].
% To restore the previous setting, press [Cancel]. To cancel the Punch function with the current setting
saved, press [Function OFF]. The Output Setting Screen will be restored.
The Output Setting Screen will be restored.
The front image of the machine provided on the Output Setting Screen shows that the primary (main)
tray is currently selected as an output tray.
7
Press [OK] on the Output Setting Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.