Konica Minolta bizhub PRESS C8000e - Manual (Page 124)

bizhub PRESS C8000 4-29
4.7 Adjusting Contrast: Contrast 4
NOTICE
Pressing [Default Set] on the Quality Adjustment Screen will resume the standard level for all adjustment
items.
5
Make an adjustment for Contrast on the Contrast Screen.
Press [Contrast] to display the Contrast Screen.
Select one from [-1] to [-4] to decrease the contrast of copy image.
Select one from [+1] to [+4] to increase the contrast of copy image.
% Select [0] to resume the standard level.
% Press [Default Set] to resume the standard level and return to the Quality Adjustment Screen.
% Proceed to step 6 if a sample copy is desired to check the adjustment result.
% To complete the adjustment, press [OK] and proceed to step 7.
6
Output a sample copy.
After setting the desired adjustment level, press [Adj. Proof Copy] on the Quality Adjustment Screen,
[Adj. Proof Copy] on the Contrast Screen, or Proof Copy on the control panel. Check the adjustment
result with output image.
% Repeat steps from 3 to 6 until the desired result is obtained.
7
Press [Close] on the Quality Adjustment Screen.
The Copy Screen will be restored. The [Contrast] indication can be found under [Quality Adj.] on the
Copy Screen.