Konica Minolta bizhub PRESS C8000e - Manual (Page 180)

bizhub PRESS C8000 6-16
6.3 Using Finisher FS-521 6
5
Press the desired staple position key.
6
Press [OK].
% To restore the previous setting, press [Cancel]. To cancel the Staple function with the current posi-
tion setting saved, press [Function OFF].
The Output Setting Screen will be restored.
The front image of the machine provided on the Output Setting Screen shows that the primary (main)
tray is currently selected as an output tray.
7
Press [OK] on the Output Setting Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
% The suspension button provided on Finisher FS-521 will not function while the machine operates
output in Staple mode.
NOTICE
The primary (main) tray gradually goes down while printed materials are output. DO NOT allow any
object to interfere with the operation of the primary (main) tray on the left side of the finisher, as any
interference may cause damage to the finisher.
NOTICE
The primary (main) tray of Finisher FS-521 has a limit in capacity. Be careful not to exceed the limit,
otherwise unexpected trouble may be caused.
d
Reference
You can temporarily stop or resume the output to Finisher FS-521. For details, see Section 4 of the User's
Guide - Main Body.