Konica Minolta bizhub PRESS C8000e User Manual
Page 182
bizhub PRESS C8000
6-18
6.4
Using Saddle Stitcher SD-506
6
5
Press [Trimming] or [Non Trimming] to specify whether or not to use the trimming function.
6
Press [OK].
To restore the previous setting, press [Cancel]. To cancel the Fold & Staple function with the current
setting saved, press [Function OFF].
The Output Setting Screen will be restored.
7
Press [OK] on the Output Setting Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
You will also find that Booklet in Application is selected automatically.
8
Fully withdraw the saddle stitcher tray.
% Open the tray stand located under the tray when fully with-
drawing it.
NOTICE
When using the saddle stitcher tray, be sure to fully withdraw it.
Open the tray stand located under the saddle stitcher tray when
fully withdrawing it.
% The folded and stapled (and trimmed) sets will be delivered
into the saddle stitcher tray. If the tray is not fully with-
drawn, the machine will detect that the tray is filled up even
with less number of finished sets than that specified in spec-
ifications.
NOTICE
Never return the saddle stitcher tray to its original position with
the tray stand opened.
9
Enter the desired print quantity from the control panel keypad.
Enter 5 or less for Multi Half Fold.