7 specifying original thickness: thickness, Specifying original thickness: thickness -12 – Konica Minolta bizhub PRESS C8000e User Manual
Page 50
bizhub PRESS C8000
3-12
3.2
Original Setting
3
1
Position the original in the ADF.
Normal originals can be set together with the z-folded original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Original Setting].
The Original Setting Screen will be displayed.
4
Select [Z-Folded] from under [Special].
5
Press [OK] to return to the Copy Screen.
% Press [Default Set] to restore the initial setting. Press [Cancel] to resume the previous setting.
% Printing will not start without the Copy Screen displayed. Be sure to display the Copy Screen.
3.2.7
Specifying Original Thickness: Thickness
Make this setting when copying thin or thick originals loaded in the ADF.
0
Load the original in the ADF.
0
Avoid making duplex copies [2->2] or [2->1] in Thin mode, otherwise the original may be damaged.
0
This setting is compatible with all copy conditions.
1
Position the original in the ADF.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Original Setting].
The Original Setting Screen will be displayed.
4
Select either [Thick] or [Thin] under [Thickness].
% For the original of normal thickness (50 g/m
2
to 128 g/m
2
) loaded in the ADF, select [Normal].
Key
Description
Select for originals ranging from 129 g/m
2
to 210 g/m
2
in weight
Select for originals ranging from 35 g/m
2
to 49 g/m
2
in weight.