Konica Minolta bizhub PRESS C8000e - Manual (Page 70)

bizhub PRESS C8000 3-32
3.6 Paper Setting 3
Weight Select one of 9 types provided on
the screen. Four types of coated pa-
per becomes available when the
weight over 81 g/m
2
is selected.
The unit of weight can be switched.
The unit used to register the condi-
tion will also be used to display that
condition on the Machine Screen
and Copy Screen when recalled.
Weight Setting:
64 g/m
2
-74 g/m
2
75 g/m
2
-80 g/m
2
81 g/m
2
-105 g/m
2
106 g/m
2
-135 g/m
2
136 g/m
2
-162 g/m
2
163 g/m
2
-220 g/m
2
221 g/m
2
-256 g/m
2
257 g/m
2
-300 g/m
2
301 g/m
2
-350 g/m
2
Unit Change:
g/m
2
, Duodecimo-Kg, Octavo-Kg, lb
Bond, lb Index, lb Cover
Available paper weight varies with each
tray.
Tray 1 to 3: 64 g/m
2
-300 g/m
2
Tray 4 to 9: 64 g/m
2
-350 g/m
2
PB tray of Perfect Binder PB-503:
81 g/m
2
-220 g/m
2
PI tray of Folding Unit FD-503: 81 g/m
2
-
220 g/m
2
Colored Paper Specify whether or not the paper is
colored. White, Non-White
Punch Specify whether or not the paper is
punched. Use this setting to avoid
using the punched paper mixed with
paper without punch holes. Pre-Punched, No Hole-Punch
Both Sides Adjust Specify magnification ratios (verti-
cal, horizontal), image shift amounts
(up/down, right/left), and registra-
tion loop amount for both front and
back pages in order to align the im-
ages printed on front and back pag-
es in duplex printing, and also make
the chart adjustment to adjust the
misalignment shown on front and
back pages.
For Both Sides Adjust, note that the
degree of shrinkage varies depend-
ing on the type or brand of paper,
and hygrothermal environment of
storage. We recommend that the
adjustments other than the chart
adjustment should be made for
each paper to be used.
The horizontal magnification ratio of
the back page can be adjusted from
[Common Setting] of the Adminis-
trator Setting. Vertical Zoom:
-100 to +100 (1 step = 0.01%)
Horizontal Zoom:
Front -100 to +100 (1 step = 0.01%), Back
-80 to +20 (1 step = 0.01%)
Image Shift Up/Down:
-100 to +100 (1 step = 0.1 mm)
Image Shift Right/Left:
-30 to +30 (1 step = 0.1 mm)
Registration Loop:
-99 to +99 (1 step = 0.1 mm)
Curl Adjustment Correct the curl of output paper in
mechanical method.
Also, switching on/off for Humidifier
Setting of the Curl Adjustment is
available if Relay Unit RU-508 is
mounted with Humidifier HM-101. Curl Adjustment:
-2, -1, 0 +1, +2
Humidifier Setting: ON, OFF
Setting item Description Setting options