6 punching file holes in copies: punch, Punching file holes in copies: punch -56 – Konica Minolta bizhub PRESS C8000e User Manual
Page 220
bizhub PRESS C8000
6-56
6.9
Using Finisher FS-612
6
% To restore the previous setting, press [Cancel]. To cancel the function with the current setting saved,
press [Function OFF].
The Output Setting Screen will be restored.
The front image of the machine provided on the Output Setting Screen shows that the fold/staple
mode tray is currently selected as an output tray.
7
Press [OK].
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
6.9.6
Punching File Holes in Copies: Punch
Finisher FS-612 mounted with Punch Kit PK-512/PK-513 can punch file holes in copies. Punch and Staple
are compatible.
NOTICE
Do not punch special paper type such as labels or tracing paper. Punching in special paper may cause un-
expected machine trouble.
0
Be sure that the side guides of the source tray are securely aligned to the paper loaded in that tray.
Otherwise, copies may not be punched in position.
0
If ATS (automatic tray switch) functions while punching operation is in progress, punch holes may be
off the position.
Original
Output
2-Hole Punch
Left
Right
Top
4-Hole Punch
Left
Right
Top
Swedish 4-Hole Punch
Left
Right
Top
Specification
Description
Number of punch holes
2 or 4
Paper size
A3
w to A5 v
Paper weight
64 g/m
2
to 128 g/m
2