5 setting print quantity, 1 setting print quantity, 2 changing entered print quantity – Konica Minolta bizhub PRESS C8000e User Manual
Page 31: Setting print quantity -19, Changing entered print quantity -19
bizhub PRESS C8000
2-19
2.5
Setting Print Quantity
2
2.5
Setting Print Quantity
This section describes how to set or change the print quantity.
2.5.1
Setting Print Quantity
The machine is initially set to copy the original set in amounts determined by the print quantity setting, then
output sorted sets.
0
Available output mode depends on the option configuration and initial setting of the machine.
1
Enter the desired print quantity from the keypad on the control panel.
Entered quantity will be displayed on the Machine Screen or Copy Screen.
2.5.2
Changing Entered Print Quantity
Follow the procedure below to change the print quantity that has been already entered.
1
Press C on the control panel.
The quantity displayed on the Machine Screen or Copy Screen
will return to [0001].
2
Enter the new quantity from the keypad on the control panel.
Entered quantity will be displayed on the Machine Screen or Copy Screen.