Konica Minolta bizhub PRESS C8000e - Manual (Page 398)

bizhub PRESS C8000 10-90
10.15 [03 Administrator Setting] - [10 Security Setting] 10
10.15 [03 Administrator Setting] - [10 Security Setting]
10.15.1 [02 HDD Management Setting] - [01 HDD Lock Password]
Change the HDD lock password.
NOTICE
The HDD lock password cannot be changed unless the Enhanced Security mode is activated.
The administrator password consists of 8 alphanumeric characters and symbols.
1
Follow the procedure on page 10-2 to display the Administrator Setting Menu Screen.
2
Press [10 Security Setting], [02 HDD Management Setting], and [01 HDD Lock Password] in sequence.
The HDD Lock Password Screen will be displayed.
3
Press [Current Password] to enter the password currently used, then press [OK].
4
Press [New Password] to enter your new password, then press [OK].
5
Press [Input Confirmation] to enter your new password once more, then press [OK].
6
Press [OK] to complete the setting.
% To cancel the change, press [Cancel].
In either case, the HDD Management Setting Menu Screen will be restored.
10.15.2 [02 HDD Management Setting] - [02 Delete Temp. Data Setting]
Specify whether or not to overwrite the temporary image data, and also the erase mode for the data to be
overwritten.