Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 84)

AlliedView™-EMS 4.0.2 Device Management Guide Page 84 of 441
Port-based Authentication
Basic Info
Displays basic port authentication and VLAN information.
Note - Device Manager always treats objects of type OCTET STRING as a sequence
of bytes in hexadecimal format and does not convert them to plain text format
when necessary. As a result, the Guest VLAN Ports parameter will neither be
readable nor configurable.
Port Authentication Info
Displays the value of the MAC based authentication information and Radius
attributes.
Note - The current firmware version does not allow Radius Attribute ACL Name
Enabled parameter to be set to 'true' as its value.
Port Session Authentication Info
Displays the session statistics information for an Authenticator PAE.
PAE Port Info
Displays the system level information for each port supported by the Port Access
Entity.
Authenticator PAE Info
Displays configuration objects for the Authenticator PAE associated with each port.
Note - The current firmware version does not allow the Administrative Controlled
Directions and Key Transmission Status parameters to be configured.
Authenticator PAE Statistics
Displays statistics objects for the Authenticator PAE associated with each port.
Authenticator PAE Diagnostics
Displays diagnostics objects for the Authenticator PAE associated with each port.
Authenticator PAE Session Statistics
Displays session statistics objects for the Authenticator PAE associated with each
port.
Note - The current firmware version is unable to display any value for the User
Name parameter.
Note - The current firmware version returns a 'noSuchName' value for the following
parameters:
•
Received Octets
•
Transmitted Octets
•
Received Frames
•
Transmitted Frames