Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 51)

AlliedView™-EMS 4.0.2 Device Management Guide Page 51 of 441
Link Aggregation Info
Displays link aggregation information about a particular port component.
Frame Size Info
Displays maximum frame size information about a particular port component.
Security Menu
From the Security menu, you can view and edit different security and authentication
protocols SSL, SSH, and port-based authentication.
Authentication/Authorization/Accounting
Basic Info
Displays basic information about Authentication/Authorization/Accounting.
Note - The current firmware version does not allow the EAP Current Method List
parameter to be configured. Attempting to configure this parameter to any valid
value will result in the error "The error occurred with 'Set' operation. Error: gen
error".
Note - The current firmware version will always display an encrypted value for the
System Password Level 1 to 15 parameters regardless of whether the type of
password set is 'clear text' or 'encrypted password'.
Note - The current firmware version accepts up to 160 characters for the System
Password Level 1 to 15 parameters, including the '#' or '$' character as directive that
indicates the type of password being used. However, using the '#' character will
result to an error.
Method Lists
Displays information about all method lists.
Note - The current firmware version does not allow the Row Status parameter to be
set to 'create and go' or 'destroy' as its value.
Lines
Displays information about all lines, their passwords and their authorization levels.
Note - The current firmware version does not allow the Row Status parameter to be
configured. Attempting to configure this parameter to any valid value will result in
the error "The error occurred with 'Set' operation. Error: gen Error".
Note - The current firmware version does not allow the following parameters to be
configured on the implemented data type and range: