Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 79)

AlliedView™-EMS 4.0.2 Device Management Guide Page 79 of 441
IGMP Menu
From the IGMP menu, you can view and edit IGMP information such as IGMP queries and
reports sent between devices, VLAN's IGMP functions and interfaces on which IGMP is
enabled.
MAC Multicast Info
Displays configurations of the enabling/disabling multicast.
IGMP Config
Displays configurations of the Internet Group Management Protocol function.
LLDP Menu
From the LLDP menu, you can view and edit LLDP configurations, statistics, local system
data and remote systems data components.
LLDP Configuration
General Config
Displays LLDP general function such as enabling LLDP, Tx delays and others.
Note - The current firmware version allows the user to enter any character as valid
value for the Clear Received Info parameter.
Port Config
Displays the control selection of LLDP Port VLAN-ID TLVs to be transmitted on
individual ports.
Note - The current firmware version does not allow Port VLAN Tx Enable
parameter to be set to 'true' as its value.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
o
Bit 0 - Port Description
o
Bit 1 - System Name
o
Bit 2 - System Description
o
Bit 3 - System Capabilities
Management Addresses
Displays control selection of LLDP management address TLV instances to be
transmitted.