Port menu – Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual
Page 118

AlliedView™-EMS 4.0.2 Device Management Guide
Page 118 of 441
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays statistics about frames received/transmitted on the switch port.
Note
- The current firmware version returns the value 'NULL' for the Circuit
parameter.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Interface Info
Displays port statistics such as the number of packets received and transmitted on
the port, bytes received and transmitted on the port and port status. This table also
displays high-capacity port statistics including received and transmitted
unicast/multicast/broadcast packets on the port, link up/down trap and port speed.
Note
- The current firmware version returns a 'noSuchName' value for the following
parameters:
•
Transmitted Buffer Length
•
Received Bytes (HC)
•
Received Unicast Packets (HC)
•
Received Multicast Packets (HC)
•
Received Broadcast Packets (HC)
•
Transmitted Bytes (HC)
•
Transmitted Unicast Packets (HC)
•
Transmitted Multicast Packets (HC)
•
Transmitted Broadcast Packets (HC)
•
Counter Discontinuity Time
To view high capacity (HC) port parameter values, use SNMP v2c.