Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 47)

AlliedView™-EMS 4.0.2 Device Management Guide Page 47 of 441
802.1p
Device Capabilities
Displays information on the device capabilities.
Port Priority Group
Displays information about the port priority.
Traffic Class
Displays information about the traffic class and traffic class priority.
Note - Valid MIB Set values for the Received Traffic Class parameter is [0-7]
inclusive. However, the current firmware version does not allow this parameter to
be set to 4-7 as its value.
MAC Table Info
Displays MAC table information.
MAC Base Priority Support
Displays which features of the max base priority are supported.
IGMP Menu
From the IGMP menu, you can view and edit IGMP information such as IGMP queries and
reports sent between devices, VLAN's IGMP functions and interfaces on which IGMP is
enabled.
MAC Multicast Info
Displays configurations of the enabling/disabling multicast.
IGMP Config
Displays configurations of the Internet Group Management Protocol function.
Note - Valid MIB Set values for the Host Aging Time parameter should range from
60 - 2147483647. However, the current firmware version allows the user to set
values lower than 60.
LLDP Menu
From the LLDP menu, you can view and edit LLDP configurations, statistics, local system
data and remote systems data components.
LLDP Configuration
General Config
Displays LLDP general function such as enabling LLDP, Tx delays and others.