Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 50)

AlliedView™-EMS 4.0.2 Device Management Guide Page 50 of 441
Location Info
Displays the Location information as advertised by the local system.
Note - Device Manager always treats objects of type OCTET STRING as a sequence
of bytes in hexadecimal format and does not convert them to plain text format
when necessary. As a result, the Location parameter will neither be readable nor
configurable.
POE Info
Displays the defined type of Power over Ethernet advertised by the local device.
POE/PSE Port Info
Displays a table that contains one row per port of PSE/PoE information on the local
system known to this agent.
Policy Container Config
Displays the configuration of a particular policy in the media policy container.
Note - Configuring the Row Status parameter to any invalid values will not return an
error message.
Note - Device Manager always treats objects of type OCTET STRING as a sequence
of bytes in hexadecimal format and does not convert them to plain text format
when necessary. As a result, the Port Number parameter will neither be readable
nor configurable.
802.3 Config
Port Config
Displays the LLDP configuration information that controls the transmission of IEEE
802.3.
Note - The current firmware version does not allow the 802.3 TLVs Tx Enable
parameter to be configured.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Ethernet Port Info
Displays information about a particular port component.