Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 193)

AlliedView™-EMS 4.0.2 Device Management Guide Page 193 of 441
TCP
Connection Info
Displays TCP connection-specific information.
Note - The Connection Status parameter is implemented as 'read-only'.
TCP
Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
BGP
General Info
Displays information about the BGP module.
Peer
Info
Displays BGP Peer information.
Note - The current firmware version does not allow the following parameters to be
configured:
•
Connect Retry Interval
•
Configured Hold Time
•
Configured Keep Alive
•
Min AS Origination Interval
•
Min Route Advertisement Interval
Path Attributes
Displays the BGP path attributes.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.