Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 46)

AlliedView™-EMS 4.0.2 Device Management Guide Page 46 of 441
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Aging Time Info
Displays information about the device's aging time.
Spanning Tree Info
STP
Standard
Displays the spanning tree information such as the STP version and path cost.
Additional Info
Displays additional STP information like supported type.
Note - The current firmware version does not allow the Flood BPDU Method
parameter to be set to 'bridging' as its value.
MSTP
Basic Info
Displays the basic information about MSTP.
Instance Info
Displays information that contains MSTP instance specific information for the
Multiple Spanning Tree Protocol.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays statistics about frames received/transmitted on the switch port.
Note - The current firmware version does not allow the Number of Traffic Class
parameter to be configured. Attempting to configure this parameter to any valid
value will result in the error "The error occurred with 'Set' operation. Error. bad
value.".
Note - The current firmware version returns the value 'NULL' for the Circuit
parameter.