Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 392)

AlliedView™-EMS 4.0.2 Device Management Guide Page 392 of 441
802.1p
Device Capabilities
Displays the device capabilities information.
Traffic
Class
Displays the bridge traffic class and received traffic class info.
Note - The Traffic Class Priority parameter is not applicable to the SwitchBlade x908
and should be ignored.
Note - The Received Traffic Class parameter is implemented as 'read-only'.
LLDP Menu
From the LLDP menu, you can view and edit LLDP configurations, statistics, local system
data and remote systems data components.
Note - When multiple units of the SwitchBlade x908 are stacked together, port numbering is
continuous based on the Stack ID.
•
Stack ID 1 = 1 - 96
•
Stack ID 2 = 97 - 192
•
Stack ID 3 = 193 - 288
•
Stack ID 4 = 289 - 384
This numbering scheme assumes that a unit can have a maximum of 96 ports.
LLDP Configuration
General Config
Displays LLDP general function such as enabling LLDP, transmission delays and
others.
Port
Config
Standard
Displays the LLDP configuration information of a particular port.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities