Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 228)

AlliedView™-EMS 4.0.2 Device Management Guide Page 228 of 441
Address Table
Displays the list of IP interfaces on the switch.
Route
Number
Displays the IP routing number on the switch.
Route
Table
Displays the IP routing table on the switch.
Note - The current firmware version returns the value 'NULL' for the Routing
Protocol MIB parameter.
Note - The following parameters are implemented as 'read-only':
•
Destination Port Number
•
Routing Type
•
Nexthop AS Number
•
Destination Metric 1
•
Destination Metric 2
•
Destination Metric 3
•
Destination Metric 4
•
Destination Metric 5
•
Row Status
IP
Statistics
Displays statistics about IP, such as the number of IP datagrams received.
Note - The Default TTL parameter is implemented as 'read-only'.
UDP
Listener Info
Displays UDP listener information.
UDP
Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note - The Connection Status parameter is implemented as 'read-only'.
TCP
Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.