Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 383)

AlliedView™-EMS 4.0.2 Device Management Guide Page 383 of 441
Contact Details / Memory
Displays Contact Details information and Memory information of the device.
Host Resources
General System Info
Displays general information about the host resources.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Time and Date parameter will display a sequence of bytes in
hexadecimal format instead of the actual date and time of day.
Note - The Time and Date, Initial Load Device and Initial Load Parameter parameters
are implemented as 'read-only'.
Logical Storage Areas
Displays resource information about the storage devices.
Note - The current firmware version returns a 'noSuchName' value for the
Allocation Failures parameter.
Note - The Storage Size parameter is implemented as 'read-only'.
Note - The current firmware version does not return complete values for the
parameters under the Logical Storage Areas table and Device Manager does not
handle Get-Next request for this table correctly. As a result, the Used Storage Size
parameter displays incomplete values.
Devices
Displays resource information about the devices installed in the host.
Note - The current firmware version returns the value 'NULL' for the Device ID
parameter.
Processors
Displays basic information about the processor installed in the host.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Firmware Product ID parameter will display a sequence of bytes in
hexadecimal format instead of the actual integer value.
Running Software
Displays each distinct piece of software that is running or loaded into physical or
virtual memory of the device.
Note - The current firmware version returns the value 'NULL' for the Run ID
parameter.
Note - The Status parameter is implemented as 'read-only'.