Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 226)

AlliedView™-EMS 4.0.2 Device Management Guide Page 226 of 441
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
File System
Total Files
Displays the total number of files stored in the device.
File
List
Displays a list of the files in the switch's file system.
Loader
Load Status
Displays the status of the device loader.
Load
Parameters
Displays information about the files to be loaded.
LLDP Configuration
General Config
Displays basic LLDP configuration.
Port
Config
Displays LLDP configuration for each port.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
LLDP Statistics
Remote Tables
Displays statistics for the LLDP remote tables.
Port
Tx
Displays statistics for LLDP frames transmitted.
Port
Rx
Displays statistics for received LLDP frames.
Local System Data
General Info
Displays information about the local LLDP system.