Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 333)

AlliedView™-EMS 4.0.2 Device Management Guide Page 333 of 441
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the Trap Generation parameter will not be configurable and will display an 8-bit
binary string instead of the actual trap generation options allowed.
Ping
Results
Displays the results of the performed ping operations in the Ping Control table.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Target IP Address parameter will display a sequence of bytes in
hexadecimal format instead of the actual IP address of the remote host.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Last Good Probe parameter will display a sequence of bytes in
hexadecimal format instead of the actual date and time of day.
Note - The current firmware version is unable to display any value for the Owner
Index and Test Name parameters.
Note - The current firmware version returns the value '???(3)' for the Operational
Status parameter when the Admin Status parameter in the Ping Control table is set
to enabled.
Ping Probe History Table
Displays ping probe history in performing ping operations.
Note - The current firmware version returns a 'noSuchName' value for the Ping
Probe History Table parameters.
Restart Device
Initiates a restart on the switch.
Note - For devices that is set to standalone mode, while the Reset operation is in
progress, error "The error with 'Set' operation. Error: time out occurred." will be
displayed and should be ignored.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.