Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 82)

AlliedView™-EMS 4.0.2 Device Management Guide Page 82 of 441
802.3 Config
Port Config
Displays the LLDP configuration information that controls the transmission of IEEE
802.3
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the 802.3 TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
o
Bit 0 - Mac Physical Config Status
o
Bit 1 - Power Via MDI
o
Bit 2 - Link Aggregation
o
Bit 3 - Max Frame Size
Ethernet Port Info
Displays information about a particular port component.
Security Menu
From the Security menu, you can view and edit different security and authentication
protocols SSL, SSH, and port-based authentication.
Authentication/Authorization/Accounting
Basic Info
Displays basic information about Authentication/Authorization/Accounting.
Note - The current firmware version does not allow the EAP Current Method List
parameter to be configured.
Note - The current firmware version will always display an encrypted value for the
System Password Level 1 to 15 parameters regardless of whether the type of
password set is 'clear text' or 'encrypted password'.
Note - The current firmware version accepts up to 160 characters for the System
Password Level 1 to 15 parameters, including the '#' or '$' character as directive that
indicates the type of password being used.
Method Lists
Displays information about all method lists.
Note - The current firmware version does not allow Row Status parameter to be set
to 'create and go' or 'destroy' as its value.
Lines
Displays information about all lines, their passwords and their authorization levels.