Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 261)

AlliedView™-EMS 4.0.2 Device Management Guide Page 261 of 441
Enable
Enables the port.
Disable
Disables the port.
Port Trunking
Displays Port Trunking information as returned by the device and allows the
configuration of trunk name, method and port list.
Note - The current firmware version allows the Trunk Name parameter to be
configured.
Note - L3 Models: The current firmware version does not return any Set Error when
configuring the Row Status parameter to 'not in service'.
Note - L3 Models: The current firmware version does not return any Set Error when
configuring the Port List parameter to invalid values.
Port Mirroring
Displays Port Mirroring parameters and allows you to create/delete a port mirror.
Note - The Mirroring Source Module, Mirroring Source Port and Mirroring
Destination Module parameters are not applicable to the AT-9400 series and should
be ignored.
Note - L2+ Models: The current firmware version does not allow the Mirroring
Source Port (Ingress) and Mirroring Source Port (Egress) parameters to be set to
NULL.
Note - L3 Models: The current firmware version does not return any Set Error when
configuring the Mirroring Source Port (Ingress) and Mirroring Source Port (Egress)
parameters to invalid values.
MAC Address Security
Displays MAC Address Security parameters and allows you to set the security level
for dynamic and static MAC addresses learned and assigned to a port.
DoS Defense
Displays DoS Defense parameters and allows you to enable/disable a defense
mechanism on a port.
Note - The Attack Mirror Port parameter under each Attack Type option is already
obsolete and should be ignored.
Note - The Attack Mirror Port Status parameter is not applicable to the SYN Flood
and Smurf defenses and should be ignored.