Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 75)

AlliedView™-EMS 4.0.2 Device Management Guide Page 75 of 441
Route Table
Displays the CIDR routing tables.
Note - The current firmware version does not allow the Routing Type parameter to
be set to 'local'.
Note - The current firmware version does not allow the following parameters to be
configured:
o
Destination Port Number
o
Routing Protocol MIB
o
Destination Metric 2
o
Destination Metric 3
o
Destination Metric 4
o
Destination Metric 5
Note - The current firmware version only allows the Routing Type parameter to be
set to 'reject' if the value prior to set operation is 'remote'.
ICMP
ICMP Statistics
Displays ICMP Statistics.
Error Messages
Displays the variable that controls the ability to generate ICMP error messages.
DHCP
DHCP Client
DHCP Client Action
Displays DHCP actions configured in the device.
Note - The current firmware version does not allow Host Name parameter
to be configured.
Note - The current firmware version does not allow Command Action
parameter to be set to 'renew force auto config' as its value.
DHCP Client Command
Displays what DHCP action to apply.
DHCP Relay
Basic Info
Displays basic DHCP relay information.
Note - The current firmware version does not allow MIB Version parameter
to be configured.