Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 56)

AlliedView™-EMS 4.0.2 Device Management Guide Page 56 of 441
Note - Valid MIB Set values for the User Name parameter should range from 1-48.
However, the current firmware version allows the user to enter values in the range
0-160.
Note - The current firmware version does not allow the Regenerate Self Key
parameter to be set to 'rsa1' as its value.
Note - Configuring the Regenerate Self Key parameter to 'rsa' or 'dsa' as its value will
cause the device to be inaccessible and may need the restarted.
Public Key Fragment Text
Displays the router's public key.
Public Key Fingerprint
Displays the fingerprint for the router's public key.
Secure Socket Layer
Basic Info
Displays basic SSL information.
Certificate Generation
Displays information about the generated keys and self signed certificates.
Note - The current firmware version does not allow the following parameters to be
configured:
o
Certificate Generation ID
o
Country Name
o
State or Province Name
o
Locality
o
Organization Name
o
Organization Unit Name
o
Common Name
o
Valid Days
o
RSA Key Length
o
Passphase
Attempting to configure these parameters to any valid value will result in the error
"The error occurred with 'Set' operation. Error: time out occurred.".
Note - The Certificate Generation Index parameter is implemented as 'read-only'.
Note - The current firmware version does not allow the Action parameter to be
configured.
Export Certificate
Displays information about the saved data from RAM and flash.