Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 194)

AlliedView™-EMS 4.0.2 Device Management Guide Page 194 of 441
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays bridge port information.
Note - The current firmware version returns the value 'NULL' for the Circuit
parameter.
LLDP Menu
From the LLDP menu, you can view and edit LLDP information such as the LLDP Port
Configuration and Local System Data.
LLDP Configuration
General Config
Displays basic LLDP configuration.
Port
Config
Displays LLDP configuration for each port.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
Bit 0 - Port Description
Bit 1 - System Name
Bit 2 - System Description
Bit 3 - System Capabilities
LLDP Statistics
Remote Tables
Displays statistics for the LLDP remote tables.
Port
Tx
Displays statistics for LLDP frames transmitted.