Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 286)

AlliedView™-EMS 4.0.2 Device Management Guide Page 286 of 441
Enable Method Lists
Displays information about Enable authentication method lists.
Note - For user-defined lists, the only valid MIB Set value for the Row Status
parameter is ‘destroy’. Attempting to set this parameter to any other value will
result in the error message: ”The error occurred with 'Set' operation. Error: bad
value.”
Application Authentication Settings
Displays various applications that can be used to execute authentication such as
console, telnet, HTTP and SSH.
Server Group Info
Displays information about server groups.
Note - For user-defined server groups, the only valid MIB Set value for the Row
Status parameter is ‘destroy’. Attempting to set this parameter to any other value
will result in the error message: ”The error occurred with 'Set' operation. Error:
bad value.”
Server Info
Displays information about servers.
Note - The current firmware version does not allow the Authentication Key
parameter to be configured.
Note - The only valid MIB Set value for the Row Status parameter is ‘destroy’.
Attempting to set this parameter to any other value will result in the error message:
”The error occurred with 'Set' operation. Error: bad value.”
Access Control List
Ethernet Info
Displays ACL mask of Ethernet information.
Note - The current firmware version does not allow the following parameters to be
configured:
•
Filtered Ports
•
Source MAC Address Mask
•
Destination MAC Address Mask
Ethernet Rule
Displays ACL rule of Ethernet information.