Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 119)

AlliedView™-EMS 4.0.2 Device Management Guide Page 119 of 441
Note - Valid MIB Set values for the Port Alias parameter is up to 64 characters.
However, values exceeding 21 characters will be truncated.
Note - The current firmware version returns the value 'NULL' for the Specific Media
MIB parameter.
Error Statistics
Displays port error statistics such as error frames and collision frames. It also
displays deferred transmissions and ethernet chipset information.
Note - The current firmware version returns the value '???(0)' for the Duplex Status,
Rate Control Ability, and Rate Control Status parameters.
Spanning Tree Info
Displays the port's spanning tree parameters.
Note - The current firmware version returns a 'noSuchName' value for the Path
Cost Contribution parameter.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive. However, the application allows it to be configured up to the value
of 200000000.
Note - Setting the Spanning Tree Status parameter to "disable" will result to losing
the connection with the AT-9000/xx device and the only way to re-establish
connection is to perform a manual reboot.
Note - Values entered for the Port Priority parameter must be multiples of 16.
Enable
Enables the port.
Disable
Disables the port.
AT-9000/xx Series