Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 70)

AlliedView™-EMS 4.0.2 Device Management Guide Page 70 of 441
Terminal Sessions
Displays the current number of maximum sessions and its value after reset.
DNS Client Tuning
Displays the maximum values of the cache entries and the negative cache
entries before and after reset.
DHCP Snooping Tuning
Displays the current maximum number of DHCP snooping entries.
Tuning Parameters
Displays the current value, value after reset, default value, minimum and
maximum value of the different tuning parameters.
Host Parameters
Displays the corresponding value of the different host parameters.
Terminal Debug Mode
Displays the terminal debug mode password.
Note - The current firmware version does not allow the Terminal Debug Mode
Password to be configured.
Banner Config
Manage Banners
Displays banner messages with respect to the connection type: telnet or
console.
Clear Banner Message
When set, clears the selected banner type.
Telnet
Basic Info
Displays the basic telnet information.
Note - The current firmware version accepts up to 160 characters for the
Login Banner parameter.
Note - The current firmware version does not allow the Password parameter
to be configured.
Telnet Sessions
Displays the login time, client IP address and telnet session status.
CLI Info
Displays information if the file is enabled or not.