Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 316)

AlliedView™-EMS 4.0.2 Device Management Guide Page 316 of 441
Note - Setting the Forwarding Status parameter to 'not forwarding' will not return an
error message but connection with the device will be lost. The only way to re-
establish connection will be to perform a manual reset.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note - The Connection Status parameter is implemented as 'read-only'.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
DNS
DNS Server
Displays DNS server information.
Note - The current firmware version does not allow the Status parameter to be set
to 'active' as its value. Attempting to do so will result in the error message "The
error occurred with 'Set' operation. Error: time out occurred".
DNS
Client
Displays DNS Client information.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.