Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 346)

AlliedView™-EMS 4.0.2 Device Management Guide Page 346 of 441
Device Manager LEDs for the AT-x900-24X Series
LED State Description
PWR 1 and
PWR 2
Green
Gray
There is a power supply unit (PSU) in the PSU bay.
There is no power supply unit (PSU) in the PSU bay.
FAN Green
Gray
There is a functioning Fan Only Module (FOM) in the PSU bay.
There is no functioning Fan Only Module (FOM) in the PSU bay.
DUPLEX Green
Orange
The port is operating at full duplex.
The port is operating at half duplex.
Note - Please refer to Uplink Modules for the operations and behavior of the Expansion
Modules installed on these devices.
Note - The PWR LEDs do not reflect the operating state of the power supplies installed.
The PWR LEDs simply indicate the presence or absence of power supplies in the rear of
the chassis.
Note - The FAN LED does not reflect the operating state of the FAN module installed. The
FAN LED simply indicates the presence or absence of a FAN module in the rear of the
chassis.
Note - If only one expansion module is installed and it is installed on the right bay of the
device, the expansion module image will appear on the left bay of the device image.
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log
into the CLI using Telnet.
System Info
Standard
Displays basic system information, including system name, location, contact and
description.
Enterprise
CPU Utilization
Displays information about the CPU utilization over different periods of time.
Fan
Speeds
Displays information about fans installed in the device that have their fan
speeds monitored by environment monitoring hardware.