beautypg.com

Vrrp menu, Security menu – Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual

Page 282

background image


AlliedView™-EMS 4.0.2 Device Management Guide

Page 282 of 441

VRRP Menu

From the VRRP menu, you can view and edit VRRP-related information such as the current

VRRP version, VRRP status, VRRP statistics and IP addresses associated with VRRP.

Basic Info

Displays basic information such as the particular version of the Virtual Routing

Redundancy Protocol supported by the device and the whether the VRRP-enabled

router will generate SNMP traps.

Note

- The current firmware version returns 'noSuchName' for the Trap Packet IP

Address and Trap Authentication Error Type parameters.


Operations

Displays the table containing statistics information about a given virtual router.

Note

- The current firmware version does not allow the Primary IP Address and

Authentication Key parameters to be configured.

Note

- The current firmware version does not allow the Priority parameter to be

configured when the Virtual IP Address (VRRP -> Associated IP Addresses) and the

Master IP Address (VRRP -> Operations) values are the same.


Associated IP Addresses

Displays the table of addresses associated with this virtual router.


Statistics

Diplays the total number of VRRP packets received with an invalid VRRP checksum

value, with an unknown or unsupported version number and with an invalid VRID

for this virtual router.

Security Menu

From the Security menu, you can view and edit different security and authentication

protocols SSL, SSH, AAC, ACL, port-based and MAC-based authentication.

Authentication Info

Displays authentication information such as the Port Access Control status,
authentication protocol used to authenticate user and authentication mode of the

device.


Port-based Authentication

PAE Port Info

Displays the system level information for each port supported by the Port Access

Entity.