beautypg.com

Bridge menu – Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual

Page 257

background image


AlliedView™-EMS 4.0.2 Device Management Guide

Page 257 of 441


ICMP Statistics

Displays ICMP statistics.

Bridge Menu

From the Bridge menu, you can view and edit bridge information such as the forwarding

database and the spanning tree status.

Forwarding Database

Note

- Forwarding Database table entries for aggregated ports do not reflect the correct

port number in the Port Number column.

Note

- When multiple units of the AT-9400 series are stacked together, the FDB table will

only return the FDB entries of the master switch.

Note

- L2+ Models: Changes to the Forwarding Database table caused by dynamic network

topology/configuration changes will not be reflected unless the device is restarted.


Standard

View

Displays the Forwarding Database table as returned by the device.


Enhanced

View

Displays the Forwarding Database table on a per port basis. User can select a port

or group of ports to view its corresponding Forwarding Database entries.


Discard/Aging Time Info

Displays information about the number of address entries that were learned but

discarded because either there was a lack of memory or the entry's aging timer
expired.


Spanning Tree Info

Displays spanning tree parameters such as priority and cost.

Note

- The current firmware version does not allow the Spanning Tree Status

parameter to be configured when the Spanning Tree Version is set to 'MSTP'.


Statistics

Displays statistics about frames received/transmitted on the switch port.


Basic Bridge Info

Displays basic bridge information.


Bridge Port Info

Displays statistics about frames received/transmitted on the switch port.