Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 204)

AlliedView™-EMS 4.0.2 Device Management Guide Page 204 of 441
Slot
Info
Displays information on the Power Supply Bay slots.
Physical
Interfaces
Displays information about the interfaces found in the device.
Firmware Info
Install Configurations
Displays information about the Software release currently loaded in the device.
Note - The current firmware version returns a 'noSuchName' value for the Release
File Exists? and Patch File Exists? parameters.
Install
History
Displays information about the install history.
Configuration
File
Displays the Configuration file name.
Note - The current firmware version accepts inputs from 5 to 32 characters for the
Startup Config and Save Running Config parameters.
Release
Licenses
Displays a list of software releases installed on the switch.
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
File System
Total Files
Displays the total number of files stored in the device.
File
List
Displays a list of the files in the switch's file system.
Loader
Load Status
Displays the status of the device loader.
Load
Parameters
Displays information about the files to be loaded.
DHCP Ranges
Displays information about the DHCP module.
Reset Cold
Initiates a cold restart on the switch.