Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 336)

AlliedView™-EMS 4.0.2 Device Management Guide Page 336 of 441
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Note - The current firmware version returns the value "00 00 CD 00 00 00" for the
Management MAC Address parameter of base port 11.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.
Note - Valid MIB Set values for the Aging Time parameter is in the range [10-630]
inclusive.
Note - Values entered for the Aging Time parameter must be multiples of 10. Values
that are not multiples of 10 will be automatically rounded up to the nearest tens.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays bridge port information.
Note - The current firmware version returns the value 'NULL' for the Circuit
parameter.
802.1p
Device Capabilities
Displays the device capabilities information.
Traffic Class
Displays the bridge traffic class and received traffic class info.
Note - The Traffic Class Priority parameter is not applicable to the AT-x900-12X
series and should be ignored.
Note - The Received Traffic Class parameter is implemented as 'read-only'.