Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 53)

AlliedView™-EMS 4.0.2 Device Management Guide Page 53 of 441
Note - The current firmware version accepts up to 160 characters for the User
Password parameter, including the '#' or '$' character as directive that indicates the
type of password being used. However, using the '#' character will result to an
error.
Authenticated Users
Displays all the current users that have been authenticated.
EAP Method Lists
Displays information about all EAP method lists.
Note - The current firmware version does not allow the Row Status parameter to be
set to 'create and go' or 'destroy' as its value.
Password Verification
Displays table that specifies per every system level, old and new passwords.
Note - The current firmware version does not allow the Old Password, New
Password and Confirm Password parameters to be configured if the values for these
parameters were initially configured using CLI.
Port-based Authentication
Basic Info
Displays basic port authentication and VLAN information.
Note - Device Manager always treats objects of type OCTET STRING as a sequence
of bytes in hexadecimal format and does not convert them to plain text format
when necessary. As a result, the Guest VLAN Ports parameter will neither be
readable nor configurable.
Port Authentication Info
Displays the value of the MAC based authentication information and Radius
attributes.
Note - The current firmware version does not allow the Radius Attribute ACL
Name Enabled parameter to be set to 'true' as its value.
Port Session Authentication Info
Displays the session statistics information for an Authenticator PAE.
PAE Port Info
Displays the system level information for each port supported by the Port Access
Entity.
Note - The current firmware version does not allow the Initialize and Re-
authenticate parameters to be set to 'true' as its value.