Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 348)

AlliedView™-EMS 4.0.2 Device Management Guide Page 348 of 441
Board Info
Displays basic information on the boards that are currently installed.
Note - The current firmware version returns the value "boards(272)" for the Board
ID parameter of the AT-x900-24XS.
Slot
Info
Displays information on the Power Supply Bay slots.
Physical
Interfaces
Displays information about the interfaces found in the device.
Firmware Info
Install Configurations
Displays information about the Software release currently loaded in the device.
Note - The current firmware version returns a 'noSuchName' value for the Release
File Exists? and Patch File Exists? parameters.
Configuration
File
Displays the Configuration file name.
Note - The current firmware version accepts inputs from 4 to 38 characters for the
Startup Config and Save Running Config parameters.
Release
Licenses
Displays a list of software releases installed on the switch.
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
File System
Total Files
Displays the total number of files stored in the device.
File
List
Displays a list of the files in the switch's file system.
Note - The current firmware version does not allow the File Status parameter to be
configured.
Loader
Load Status
Displays the status of the device loader.
Note - The current firmware version does not allow the Load Status parameter to
be set to 'actionupload'.