Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 38)

AlliedView™-EMS 4.0.2 Device Management Guide Page 38 of 441
Management ACL Tuning
Displays the current number of access rules and the number after reset.
SSH Tuning
Displays the current number of the maximum number of authorized keys and its
value after reset.
Terminal Sessions
Displays the current number of maximum sessions and its value after reset.
DNS Client Tuning
Displays the maximum values of the cache entries and the negative cache entries
before and after reset.
DHCP Snooping Tuning
Displays the current maximum number of DHCP snooping entries.
Tuning Parameters
Displays the current value, value after reset, default value, minimum and maximum
value of the different tuning parameters.
Host Parameters
Displays the corresponding value of the different host parameters.
Terminal Debug Mode
Displays the terminal debug mode password.
Note - The current firmware does not allow the Terminal Debug Mode Password
parameter to be configured.
Banner Config
Manage Banners
Displays banner messages with respect to the connection type: telnet or console.
Clear Banner Message
When set, clears the selected banner type.
Telnet
Basic Info
Displays the basic telnet information.
Note - The current firmware does not allow the Password parameter to be
configured.
Note - Valid MIB Set values for the Login Banner parameter should range from 1-158
characters. However, the current firmware version allows the user to set values up
to 160 characters.