Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 49)

AlliedView™-EMS 4.0.2 Device Management Guide Page 49 of 441
Remote Systems
Connection Info
Displays one or more rows per physical network connection.
Management Addresses
Displays the management address information on the remote system learned on a
particular port contained in the local chassis.
Note - The current firmware version returns the value 'NULL' for the OID
parameter.
LLDP MED
Device Info
Displays information which describe the device's behavior of the LLDP-MED.
MED Port Config
Displays the LLDP configuration information that controls the transmission of the
MED.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the MED TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
•
Bit 0 - Capabilities
•
Bit 1 - Network Policy
•
Bit 2 - Location
•
Bit 3 - Extended PSE
•
Bit 4 - Extended PD
•
Bit 5 - Inventory
Network Policy Info
Displays information about a particular policy on a specific port component.
Note - Device Manager does not handle bit string correctly. As a result, the
Application Type parameter will not be displayed.