Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 81)

AlliedView™-EMS 4.0.2 Device Management Guide Page 81 of 441
o
Bit 0 - Port Description
o
Bit 1 - System Name
o
Bit 2 - System Description
o
Bit 3 - System Capabilities
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the MED TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
o
Bit 0 - Capabilities
o
Bit 1 - Network Policy
o
Bit 2 - Location
o
Bit 3 - Extended PSE
o
Bit 4 - Extended PD
o
Bit 5 - Inventory
Network Policy Info
Displays information about a particular policy on a specific port component.
Note - The current firmware version does not return any value for the Application
Type parameter.
Location Info
Displays the Location information as advertised by the local system.
Note - Device Manager always treats objects of type OCTET STRING as a sequence
of bytes in hexadecimal format and does not convert them to plain text format
when necessary. As a result, the Location parameter will neither be readable nor
configurable.
POE Info
Displays the defined type of Power over Ethernet advertised by the local device.
POE/PSE Port Info
Displays a table that contains one row per port of PSE/PoE information on the local
system known to this agent.
Policy Container Config
Displays the configuration of a particular policy in the media policy container.
Note - Device Manager always treats objects of type OCTET STRING as a sequence
of bytes in hexadecimal format and does not convert them to plain text format
when necessary. As a result, the Port Number parameter will neither be readable
nor configurable.