Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 281)

AlliedView™-EMS 4.0.2 Device Management Guide Page 281 of 441
IGMP Menu
From the IGMP menu, you can view and edit IGMP information such as IGMP queries and
reports sent between devices, VLAN's IGMP functions and interfaces on which IGMP is
enabled.
IGMP Config
Displays configurations of the Internet Group Management Protocol function.
Note - IGMP Config parameters cannot be configured when the Row Status
parameter under IGMP -> MGMD Management -> Router Interface Info is set to
'active'.
VLAN Info
Displays VLAN parameters such as the maximum supported VLANs and maximum
group number per VLAN.
Query Info
Displays IGMP parameters such as the current IGMP query packets which is
captured by this device, as well as the IGMP query packets sent by the device.
Group Info
Displays current information which is captured by the device provided that IGMP
Snooping and IGMP Status of associated VLAN entry are all enabled.
MGMD Management
Router Interface Info
Displays the list of interfaces on which IGMP is enabled.
Note - The current firmware version accepts values in the range [0-255]
inclusive for the Query Maximum Response Time and Last Member Query
Interval parameters. However, if the value entered is not a multiple of 10, the
firmware will convert it to the largest multiple of 10 less than the entered
value. Values less than 10 but greater than 0 will be converted to 10.
Router Cache Info
Displays the list of IP multicast groups for which there are members on a
particular interface.
Note - The Router Cache Info sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of ‘noSuchName’.