Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 191)

AlliedView™-EMS 4.0.2 Device Management Guide Page 191 of 441
Note - The current firmware version accepts inputs from 5 to 32 characters for the
Startup Config and Save Running Config parameters.
Release
Licenses
Displays a list of software releases installed on the switch.
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
File System
Total Files
Displays the total number of files stored in the device.
File
List
Displays a list of the files in the switch's file system.
Loader
Load Status
Displays the status of the device loader.
Load
Parameters
Displays information about the files to be loaded.
DHCP Ranges
Displays information about the DHCP module.
Reset Cold
Initiates a cold restart on the switch.
Reset Warm
Initiates a warm restart on the switch.
Reset Info
Displays information about the restart.
Telnet
Starts a Telnet connection to the switch.
WEB browser
Opens your web browser and connects to the switch's HTTP server.
Note - The web browser can only contact the device if the device has a valid
resource file loaded and set, and the HTTP server and GUI on the device are
enabled.