Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 115)

AlliedView™-EMS 4.0.2 Device Management Guide Page 115 of 441
Device Manager LEDs for AT-9000/xx Series
LED States Description
PWR Green The switch is receiving power.
DUPLEX Green
Orange
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.
Note - The current firmware version does not allow Device Manager to detect the presence
or absence of an SFP module in any of the SFP slots. As a result, the SFP slots on the device
image will always show SFP images regardless of whether or not SFP modules are physically
present in the slots.
Note - The current firmware version does not allow Device Manager to determine the
actual duplex mode of the ports. As a result, the Duplex LED image is always GRAY
regardless of an active connection.
Note - When the Spanning Tree Status parameter is set to 'enable', the current firmware
version does not return a value of 'blocking' for the Port State parameter of blocking ports.
As a result, blocking ports will remain green and will not turn to yellow.
Note - AT-9000/28 & AT-9000/28SP: Context menu for SFP/RJ-45 combo ports will always
be accessible on both the RJ-45 port images and the SFP port images regardless of whether
it is the RJ-45 or the SFP ports that are actually in operation.
Note - AT-9000/28 & AT-9000/28SP: Status information for SFP/RJ-45 combo ports will
always be reflected on both the RJ-45 port images and the SFP port images regardless of
whether it is the RJ-45 or the SFP ports that are actually in operation. However, if Device
Manager detects that the established link speed is 10Mbps, only the RJ-45 port images will
turn green.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - Valid MIB Set values for the System Contact parameter is up to 255
characters. However, values exceeding 127 characters will be truncated.