Routing menu – Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual
Page 205

AlliedView™-EMS 4.0.2 Device Management Guide
Page 205 of 441
Reset Warm
Initiates a warm restart on the switch.
Reset Info
Displays information about the restart.
Telnet
Starts a Telnet connection to the switch.
WEB browser
Opens your web browser and connects to the switch's HTTP server.
Note
- The web browser can only contact the device if the device has a valid
resource file loaded and set, and the HTTP server and GUI on the device are
enabled.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
IP
ARP
Table
Displays the ARP cache on the switch.
Note
- The Physical Address and Mapping Type parameters are implemented as
'read-only'.
Address
Table
Displays the list of IP interfaces on the switch.
Route
Number
Displays the IP routing number on the switch.
Route
Table
Displays the IP routing table on the switch.
Note
- The current firmware version returns the value 'NULL' for the Routing
Protocol MIB parameter.
Note
- The following parameters are implemented as 'read-only':
•
Destination Port Number
•
Routing Type
•
Next Hop AS Number
•
Destination Metric 1
•
Destination Metric 2