Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 229)

AlliedView™-EMS 4.0.2 Device Management Guide Page 229 of 441
DHCP Ranges
Displays information about the DHCP module.
BGP
General Info
Displays information about the BGP module.
Peer
Info
Displays BGP Peer information.
Note - The current firmware version does not allow the following parameters to be
configured:
•
Connect Retry Interval
•
Configured Hold Time
•
Configured Keep Alive
•
Min AS Origination Interval
•
Min Route Advertisement Interval
Path Attributes
Displays the BGP path attributes.
LAN/WAN Menu
From the LAN/WAN menu, you can view and edit information for the LAN/WAN such as
the frame relay and ISDN-related information. The submenus are unavailable if the proper
PICs are not installed.
Bridging
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced
View
Displays the Forwarding Database table on a per port basis. User can select a
port or group of ports to view its corresponding Forwarding Database
entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Note - Valid MIB Set values for the Port Path Cost parameter are in the range [1 -
65535] inclusive. Attempting to set this parameter to a value outside of the valid