Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 73)

AlliedView™-EMS 4.0.2 Device Management Guide Page 73 of 441
Syslog Collector
Displays the information to generate Syslog messages to an aggregating agent or
collector.
Syslog Application
Displays information about a managed entity that provides individual control over
the severity level of the messages that it will generate.
Note - The current firmware version does not allow the Severity parameter to be
configured.
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's routing
functions.
IP
ARP Table
Displays the ARP cache on the switch.
Address Table
Standard
Displays the list of IP interfaces on the switch.
Additional Info
Displays additional information about the address table.
Note - The current firmware version does not allow the Port Number, Net
Mask and IP Interface Owner parameters to be configured.
Note - The Backup Address parameter is not applicable to the AT-8000S
series and should be ignored.
Static Route Table
Displays the IP static routing table.
Note - The current firmware version does not allow the Routing Type
parameter to be set to 'local'.