Allied Telesis AT-9000 Series - Manual (Page 75)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
75
 Fragmented Frames— Number of undersized frames and frames
with alignment errors.
 Jabber Frames— Number of occurrences of corrupted data or
useless signals the port has encountered.
Note
The following fields are not displayed in Figure 26 on page 74.
 Undersize Frames— Number of received frames that were less
than the minimum length as specified by IEEE 802.3 (64 bytes
including the CRC).
 Dropped Frames— Number of frames successfully received and
buffered by the port, but discarded and not forwarded.
 MTU Exceed Discarded Frames— Number of received frames
with an MTU that exceeds the MTU of the switch. These frames
are discarded.
 MAC Error Frames— Number of Receive Error events seen by
the receive side of the MAC.
Displaying
Transmit
Statistics
To display the statistics on the Transmit Statistics tab, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Port.
3. Move the cursor to the right and select Statistics.
The Port Statistics page with the Tx + Rx tab selected is displayed.
See Figure 25 on page 72.
4. Click the Transmit tab.