Allied Telesis AT-9000 Series - Manual (Page 218)

Chapter 19: Setting LLDP and LLDP-MED
218
5. From the LLDP ELIN Location page, click Add.
The LLDP ELIN Location page is displayed. See Figure 80.
Figure 80. LLDP ELIN Location Page
6. Define or edit the following fields as needed:
 ID— ID number for an LLDP-MED coordinate location entry on the
switch. The range is 1 to 256. (This range is separate from the
ranges for civic and coordinate entries.) You can specify one ID
number.
 ELIN LOCATION— ELIN of 10 to 25 digits.
7. Click Apply.
8. Click SAVE.