Allied Telesis AT-9000 Series User Manual

Page 181

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide

181



TACACS+ Authentication Login— Enable or disable TACACS+
to authenticate user login. Choose from the following:

Enabled: The TACACS+ servers authenticate user login.

Disabled: The TACACS+ servers do not authenticate user
login. Authentication is attempted using the username and
password combinations specified on the User Management
page and using the USERNAME command in the CLI.



AAA Authentication Login Local— Enable or disable TACACS+
to authenticate user login in combination with local manager
accounts. Choose from the following:

Enabled: The TACACS+ servers authenticate user login.
When any TACACS+ server is not available, authentication is
attempted using the username and password combinations
specified on the User Management page and using the
USERNAME command in the CLI.

Note

For additional information about the User Management page, see
“Managing User Accounts” on page 44. For more information about
the USERNAME command, see “Local Manager Accounts” in the
AlliedWare Plus Management Software Command Line Interface
User’s Guide.



AAA Authentication Enable— Enable or disable TACACS+ to
authenticate users requesting the Privileged Exec mode. Choose
from the following:

Enabled: The TACACS+ determines whether users can
access the Privileged EXEC level using the TACACS+ enable
password.

Disabled: The TACACS+ servers do not use its enable
password. Authentication is attempted using the password
specified using the ENABLE PASSWORD command in the CLI.